- Initialize CodeMirror with existing Y.Text content (doc: yjs.notes.toString())
so text is visible immediately, not just after the next remote change
- Use dedicated Y.UndoManager for notes instead of sharing with waypoints
undo manager (different tracked origins caused conflicts)
- Use yUndoManagerKeymap for proper Yjs-aware undo/redo
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
y-codemirror.next uses the awareness 'cursor' field for text editor
cursor positions. Our map cursor tracker was using the same field name,
causing Invalid LatLng errors when the receiving participant tried to
render a CodeMirror cursor object as map coordinates.
Renamed to 'mapCursor' to avoid the collision.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When a route has overnight waypoints, the export dropdown shows a
third option: "Export Day Segments" which downloads one GPX file per
day. Each file is named day-N-start-name.gpx with the day's track
segment. Only visible when the route has multiple days.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Right-clicking a waypoint now shows a context menu with:
- "Mark as overnight stop" / "Remove overnight stop" (middle waypoints only)
- "Delete" (all waypoints)
Previously first/last waypoints were deleted on right-click and
middle waypoints toggled overnight, with no visual indication of
which action would happen.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When clicking near the existing route to add a waypoint (including POI
snap), find the closest route segment and insert after it. Falls back
to appending at the end if the click is far from the route (~200m
threshold in degrees).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- leaflet.markercluster: Dynamic import with fallback to plain layer
group. Clusters POI markers at low zoom, ungroups at zoom 15+.
- Base layer sync: baselayerchange event writes to Yjs, new
participants load the selected base layer on connect.
- Both tile overlays and base layer now persist across participants
and crash recovery.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
OverlaySync component listens to Leaflet overlayadd/overlayremove
events and writes enabled overlay IDs to Yjs routeData. On connect,
loads initial overlay state from Yjs. LayersControl.Overlay uses
checked prop to reflect the synced state.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
useYjsPoiSync: Bidirectional sync between local POI state and Yjs
routeData. When a participant enables/disables POI categories, the
change propagates to all connected clients. Initial state loaded from
Yjs on connect. Crash recovery included via existing Yjs localStorage
snapshot.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
useProfileDefaults hook observes profile changes in Yjs and merges
relevant POI categories into the enabled set. Skips initial load to
respect existing state. Cycling profiles → bike infra, hiking →
shelter + viewpoints.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The app is primarily for cycling. Default profile is now "Cycling (fast)"
instead of "Hiking". Profile order: fastbike, safety, shortest, car,
trekking.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When clicking on the route to insert a waypoint, the new point now
snaps to a nearby POI (within 50m) just like click-to-add and drag.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When a waypoint is created from or snapped to a POI, the Yjs Y.Map
now stores osmId (OSM node ID) and poiTags (phone, website, address,
opening hours, etc.). Dragging away clears this data.
This persists through the Yjs document and will be available when the
route is saved to the Journal, enabling future display of campsite
contact details, opening hours, etc. on route detail pages.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When placing or dragging a waypoint within 50m of a visible POI, the
waypoint snaps to the POI's exact coordinates and adopts its name.
Snapping only applies to visible POIs (enabled categories, current
viewport). Explicit name (from "Add as waypoint" button) is preserved
without snapping.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Clicking the button in a POI popup adds the POI's location and name as
a new waypoint at the end of the route. Uses event delegation on the
map container to handle clicks on dynamically created popup buttons.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Highlighted waypoints now render above normal waypoints (1000) but
below POI markers (1500) and the elevation highlight dot (2000).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Extract all Leaflet zIndexOffset values into z-index.ts constants:
POI markers (-1000) < cursors (-1000) < ghost waypoint (-100)
< waypoint markers (1000) < highlight dot (2000)
Replaced CircleMarker highlight with a Marker+DivIcon so it
participates in z-index ordering above waypoint markers.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- PoiRefresher: Use ref for refresh callback to avoid re-running effect
on every category change. Only trigger refresh on category changes,
not on mount.
- usePois: Bump debounce from 500ms to 1000ms, add 3s minimum interval
between actual Overpass requests, increase backoff base to 10s.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- PoiPanel: Collapsible panel with category checkboxes, count badges,
loading/error/zoom-too-low states
- PoiMarkers: L.Marker with L.DivIcon per POI, click popup with name,
hours, website, OSM link. z-index below route/waypoints.
- PoiRefresher: Listens to map moveend, refreshes POIs via usePois hook
- Wired into PlannerMap alongside existing controls
Skipped markercluster (7.3) — can add later if density is an issue.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The subtle size bump (24→28px) is sufficient visual feedback without
the outline ring.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace position-based CircleMarker highlight with index-based marker
highlighting. Hovered waypoint marker grows from 24px to 30px with an
outline ring in its color. Uses CSS transition for smooth animation.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Hovering a waypoint row in the sidebar highlights it on the map with
the same red CircleMarker used by the elevation chart hover. Reuses
the existing highlightPosition state — both sidebar and chart feed
into the same mechanism.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Use absolute positioning with left:50% + translate(-50%) for proper
horizontal centering of auto-width content. Reduced font to 10px,
padding to 1px 6px, border-radius to 8px.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Use iconSize + iconAnchor instead of CSS transform to position the
day label pill above the waypoint marker. The label was overlapping
the marker because translate(-50%, -30px) didn't clear the 24px icon.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
ExportButton.getWaypoints() wasn't reading the overnight flag from
Yjs Y.Maps, so exported plan GPX was missing <type>overnight</type>.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Three gaps in the Planner → Journal → Planner roundtrip:
1. SaveToJournalButton: wasn't including isDayBreak when building
waypoints for GPX generation
2. PlannerMap GPX import: wasn't setting overnight on Y.Maps when
importing waypoints with isDayBreak
3. use-yjs initial waypoints: wasn't setting overnight from isDayBreak
Also widened the waypoint type throughout the chain (api.sessions,
session.$id, SessionView, extractWaypoints) to carry isDayBreak.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Overnight waypoints render amber-brown (#8B6D3A) with moon icon
- Day boundary labels (white pill "Day N · X km") at overnight waypoints
- Right-click middle waypoints toggles overnight (first/last still delete)
- Wire days prop through SessionView → PlannerMap
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
WaypointSidebar and DayBreakdown were calling useTranslation() without
the "planner" namespace, then using fully qualified keys like
"planner.multiDay.overnight". Fixed to use useTranslation("planner")
and drop the prefix from all t() calls.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- ElevationChart: Dashed vertical lines at day boundaries with distance labels
- SessionView: Lift useDays() to top level, pass to both ElevationChart and
SidebarTabs to avoid duplicate hook calls
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- DayBreakdown: Collapsible day sections with per-day stats
- WaypointSidebar: Overnight toggle button (moon icon), day-grouped view
when any waypoint is marked overnight, route summary in header
- SessionView: Wire useDays() hook into sidebar via SidebarTabs
- i18n: Add multiDay keys for en + de (day labels, overnight, stats)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Yjs UndoManager tracks waypoints, no-go areas, and notes. Only
local mutations (origin "local") are undoable — remote changes
from other users are not.
- Keyboard shortcuts: Ctrl/Cmd+Z (undo), Ctrl/Cmd+Shift+Z/Y (redo)
- Shortcuts suppressed in text inputs (browser-native undo there)
- Undo/redo buttons in header with disabled state
- stopCapturing on drag to isolate drag as one undo step
- All mutation sites wrapped with "local" origin
- 5 unit tests for UndoManager behavior
- Archived undo-redo change
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
In dev mode, the sessions API and the Yjs WebSocket server are
separate processes (Vite plugin vs React Router action), so
server-side Yjs doc initialization doesn't reach the client.
Now no-go areas flow the same way as waypoints:
API response → URL params → client-side Yjs initialization.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Save to Journal now includes waypoints and no-go areas alongside
the track — the full planning state needed for round-tripping.
Export Route remains the clean track-only option for other apps.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Save to Journal now includes no-go areas in GPX extensions so they
round-trip correctly: Planner → Journal → Edit in Planner preserves
the no-go polygons.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add description text below each export option explaining the difference
- Fix z-index (z-[1001]) so dropdown renders above the map
- Align dropdown left instead of right to avoid overflow
- Widen dropdown (w-56) to fit descriptions
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The document click handler registered on open could catch the same
click event that opened the dropdown, immediately closing it.
Using mousedown avoids the race since it fires before click.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The chevron was too narrow (px-1.5 → px-2.5) and clicks were
caught by the outside-click handler before toggling the dropdown.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Split button with default "Export GPX" (track only) and dropdown:
- Export Route: clean track for use in any app
- Export Plan: track + waypoints + no-go areas in GPX extensions
(trails:planning namespace) for reimporting into the planner
Also:
- Add no-go area serialization to generateGpx (GPX extensions)
- Parse no-go areas from GPX extensions on import
- Initialize no-go areas in Yjs session from imported GPX
- Save to Journal now exports track only (consistent with Export Route)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
