useProfileDefaults hook observes profile changes in Yjs and merges
relevant POI categories into the enabled set. Skips initial load to
respect existing state. Cycling profiles → bike infra, hiking →
shelter + viewpoints.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When clicking on the route to insert a waypoint, the new point now
snaps to a nearby POI (within 50m) just like click-to-add and drag.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When a waypoint is created from or snapped to a POI, the Yjs Y.Map
now stores osmId (OSM node ID) and poiTags (phone, website, address,
opening hours, etc.). Dragging away clears this data.
This persists through the Yjs document and will be available when the
route is saved to the Journal, enabling future display of campsite
contact details, opening hours, etc. on route detail pages.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When placing or dragging a waypoint within 50m of a visible POI, the
waypoint snaps to the POI's exact coordinates and adopts its name.
Snapping only applies to visible POIs (enabled categories, current
viewport). Explicit name (from "Add as waypoint" button) is preserved
without snapping.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Clicking the button in a POI popup adds the POI's location and name as
a new waypoint at the end of the route. Uses event delegation on the
map container to handle clicks on dynamically created popup buttons.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Highlighted waypoints now render above normal waypoints (1000) but
below POI markers (1500) and the elevation highlight dot (2000).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Extract all Leaflet zIndexOffset values into z-index.ts constants:
POI markers (-1000) < cursors (-1000) < ghost waypoint (-100)
< waypoint markers (1000) < highlight dot (2000)
Replaced CircleMarker highlight with a Marker+DivIcon so it
participates in z-index ordering above waypoint markers.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- PoiRefresher: Use ref for refresh callback to avoid re-running effect
on every category change. Only trigger refresh on category changes,
not on mount.
- usePois: Bump debounce from 500ms to 1000ms, add 3s minimum interval
between actual Overpass requests, increase backoff base to 10s.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- PoiPanel: Collapsible panel with category checkboxes, count badges,
loading/error/zoom-too-low states
- PoiMarkers: L.Marker with L.DivIcon per POI, click popup with name,
hours, website, OSM link. z-index below route/waypoints.
- PoiRefresher: Listens to map moveend, refreshes POIs via usePois hook
- Wired into PlannerMap alongside existing controls
Skipped markercluster (7.3) — can add later if density is an issue.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The subtle size bump (24→28px) is sufficient visual feedback without
the outline ring.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace position-based CircleMarker highlight with index-based marker
highlighting. Hovered waypoint marker grows from 24px to 30px with an
outline ring in its color. Uses CSS transition for smooth animation.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Use absolute positioning with left:50% + translate(-50%) for proper
horizontal centering of auto-width content. Reduced font to 10px,
padding to 1px 6px, border-radius to 8px.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Use iconSize + iconAnchor instead of CSS transform to position the
day label pill above the waypoint marker. The label was overlapping
the marker because translate(-50%, -30px) didn't clear the 24px icon.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Three gaps in the Planner → Journal → Planner roundtrip:
1. SaveToJournalButton: wasn't including isDayBreak when building
waypoints for GPX generation
2. PlannerMap GPX import: wasn't setting overnight on Y.Maps when
importing waypoints with isDayBreak
3. use-yjs initial waypoints: wasn't setting overnight from isDayBreak
Also widened the waypoint type throughout the chain (api.sessions,
session.$id, SessionView, extractWaypoints) to carry isDayBreak.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Overnight waypoints render amber-brown (#8B6D3A) with moon icon
- Day boundary labels (white pill "Day N · X km") at overnight waypoints
- Right-click middle waypoints toggles overnight (first/last still delete)
- Wire days prop through SessionView → PlannerMap
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Yjs UndoManager tracks waypoints, no-go areas, and notes. Only
local mutations (origin "local") are undoable — remote changes
from other users are not.
- Keyboard shortcuts: Ctrl/Cmd+Z (undo), Ctrl/Cmd+Shift+Z/Y (redo)
- Shortcuts suppressed in text inputs (browser-native undo there)
- Undo/redo buttons in header with disabled state
- stopCapturing on drag to isolate drag as one undo step
- All mutation sites wrapped with "local" origin
- 5 unit tests for UndoManager behavior
- Archived undo-redo change
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The button was rendered as a React component, not a Leaflet control,
so clicks propagated to the map. Use L.DomEvent.disableClickPropagation
on the container — same approach Leaflet's built-in controls use.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
invalidateSize() + requestAnimationFrame ensures Leaflet knows
the map's actual dimensions after the elevation chart renders.
Also removes unnecessary filter on already-typed coordinates.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The ghost marker (route split indicator) was interfering with waypoint
dragging because it sat above waypoints (zIndexOffset 1000) and stayed
active during drag operations.
Adopt brouter-web's suspension pattern:
- Suspend route interaction on waypoint mouseover (not just dragstart),
unsuspend on mouseout — ghost marker hides before any click/drag
- Lower ghost marker zIndexOffset to -100 so waypoints always receive
clicks first
- Keep drag guards as a safety net
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Enrich BRouter response with per-point 3D coordinates and segment boundary
tracking (EnrichedRoute interface)
- ColoredRoute component: plain, elevation gradient (green→yellow→red), and
surface color modes with invisible wide polyline for click targeting
- Click-to-split: click on route polyline inserts waypoint at nearest point,
mapped to correct segment via boundary indices
- MidpointHandles: draggable CircleMarkers at route segment midpoints for
reshaping, hidden below zoom 12, opaque on hover
- Color mode toggle (select) synced via Yjs routeData
- i18n keys for color mode labels (en + de)
- Unit tests for segment boundary tracking (13 tests)
- E2E tests for enriched route response and color mode toggle
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Transactional emails:
- Add nodemailer SMTP email module with dev-mode console logging
- Magic link template and welcome template with HTML + plain text
- Wire sendMagicLink into login flow, sendWelcome into registration
- Update privacy page and deploy docs for SMTP configuration
Planner features:
- No-go areas: draw polygons on map (leaflet-geoman), synced via Yjs,
passed to BRouter as nogos parameter, route recomputes on change
- Session notes: collaborative Y.Text textarea in sidebar tab
- Crash recovery: periodic localStorage save of Yjs state, restore on reconnect
- Rate limit session creation (10/IP/hour) in /new route
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Implement the planner-multiplayer-awareness OpenSpec change:
- Add setUserName to use-yjs.ts that persists to localStorage and syncs via awareness
- Create ParticipantList component showing all session participants with color dots,
host badge, and inline name editing for the local user
- Replace plain text cursor labels with SVG pointer arrows and styled name tags
(colored background, drop shadow, rounded corners, z-index below map controls)
- Track awareness add/remove events and display auto-dismissing toasts (3s)
when participants join or leave the session
- Add i18n keys for participant UI in English and German
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Waypoint drag:
- Use observeDeep instead of observe to detect Y.Map property changes
Host election:
- Extracted to host-election.ts with 8 unit tests
- Simple rule: lowest real client ID is always host, deterministic
- Always sets role (host or participant), no missing roles
- Filters server docs (empty awareness state) from election
BRouter routing:
- Route segment-by-segment like bikerouter.de (one request per
waypoint pair), guarantees route passes through every waypoint
- Merge GeoJSON segments with accumulated stats
- 8 unit tests for segment merging and waypoint splitting
Awareness cleanup:
- Track client IDs per WebSocket connection
- Immediately remove awareness on WebSocket close
Debug panel:
- Visibility + expanded state persisted in localStorage
- Hotkey (Shift+Cmd+Option+T) toggles visibility
- Labels server docs as (server)
- All logic self-contained in YjsDebugPanel.tsx
User identity:
- Color and name persisted in localStorage across reloads
Tests: 32 total (16 existing + 8 host election + 8 routing)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Waypoint icons:
- Replace broken Leaflet default icons with numbered blue circles
- Numbers match sidebar order (1, 2, 3...)
Elevation chart:
- Mouse hover shows crosshair, elevation, and distance at cursor
- Red dot appears on the map at the corresponding route position
- Dot disappears when mouse leaves the chart
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
