Clicking the button in a POI popup adds the POI's location and name as
a new waypoint at the end of the route. Uses event delegation on the
map container to handle clicks on dynamically created popup buttons.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Try overpass.kumi.systems first, fall back to overpass-api.de
- Reduced max results from 200 to 100, added maxsize:1MB limit
- Shortened timeout from 15s to 10s, added qt (quiet) output mode
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Highlighted waypoints now render above normal waypoints (1000) but
below POI markers (1500) and the elevation highlight dot (2000).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Extract all Leaflet zIndexOffset values into z-index.ts constants:
POI markers (-1000) < cursors (-1000) < ghost waypoint (-100)
< waypoint markers (1000) < highlight dot (2000)
Replaced CircleMarker highlight with a Marker+DivIcon so it
participates in z-index ordering above waypoint markers.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Fixed sort() mutating enabledCategories array in place (used spread copy)
- Show loading status immediately when a fetch will happen, not after
the debounce delay
- Reduced debounce to 800ms and min interval to 2s for snappier response
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Picnic sites (a table in a park) are not useful for route planning
alongside actual camp sites and caravan sites. Removed from the
camping query to reduce noise.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
overpass.kumi.systems has higher rate limits than overpass-api.de.
This is the same endpoint brouter-web uses as its default.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Overpass API sometimes returns HTTP 200 with a plain-text error body
containing "rate_limited" instead of a proper 429 status. Now checks
response body for this pattern before attempting JSON parse.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- PoiRefresher: Use ref for refresh callback to avoid re-running effect
on every category change. Only trigger refresh on category changes,
not on mount.
- usePois: Bump debounce from 500ms to 1000ms, add 3s minimum interval
between actual Overpass requests, increase backoff base to 10s.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- PoiPanel: Collapsible panel with category checkboxes, count badges,
loading/error/zoom-too-low states
- PoiMarkers: L.Marker with L.DivIcon per POI, click popup with name,
hours, website, OSM link. z-index below route/waypoints.
- PoiRefresher: Listens to map moveend, refreshes POIs via usePois hook
- Wired into PlannerMap alongside existing controls
Skipped markercluster (7.3) — can add later if density is an issue.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The subtle size bump (24→28px) is sufficient visual feedback without
the outline ring.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace position-based CircleMarker highlight with index-based marker
highlighting. Hovered waypoint marker grows from 24px to 30px with an
outline ring in its color. Uses CSS transition for smooth animation.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Hovering a waypoint row in the sidebar highlights it on the map with
the same red CircleMarker used by the elevation chart hover. Reuses
the existing highlightPosition state — both sidebar and chart feed
into the same mechanism.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Use absolute positioning with left:50% + translate(-50%) for proper
horizontal centering of auto-width content. Reduced font to 10px,
padding to 1px 6px, border-radius to 8px.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Use iconSize + iconAnchor instead of CSS transform to position the
day label pill above the waypoint marker. The label was overlapping
the marker because translate(-50%, -30px) didn't clear the 24px icon.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
ExportButton.getWaypoints() wasn't reading the overnight flag from
Yjs Y.Maps, so exported plan GPX was missing <type>overnight</type>.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Three gaps in the Planner → Journal → Planner roundtrip:
1. SaveToJournalButton: wasn't including isDayBreak when building
waypoints for GPX generation
2. PlannerMap GPX import: wasn't setting overnight on Y.Maps when
importing waypoints with isDayBreak
3. use-yjs initial waypoints: wasn't setting overnight from isDayBreak
Also widened the waypoint type throughout the chain (api.sessions,
session.$id, SessionView, extractWaypoints) to carry isDayBreak.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- RouteMapThumbnail: Color route segments per day with alternating colors
when dayBreaks are present, pass through from route detail page
- overnight.test.ts: 6 tests for isOvernight/setOvernight with Y.Doc
- daybreaks-extraction.test.ts: 3 tests for GPX → dayBreaks index extraction
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Overnight waypoints render amber-brown (#8B6D3A) with moon icon
- Day boundary labels (white pill "Day N · X km") at overnight waypoints
- Right-click middle waypoints toggles overnight (first/last still delete)
- Wire days prop through SessionView → PlannerMap
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
WaypointSidebar and DayBreakdown were calling useTranslation() without
the "planner" namespace, then using fully qualified keys like
"planner.multiDay.overnight". Fixed to use useTranslation("planner")
and drop the prefix from all t() calls.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- ElevationChart: Dashed vertical lines at day boundaries with distance labels
- SessionView: Lift useDays() to top level, pass to both ElevationChart and
SidebarTabs to avoid duplicate hook calls
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- DayBreakdown: Collapsible day sections with per-day stats
- WaypointSidebar: Overnight toggle button (moon icon), day-grouped view
when any waypoint is marked overnight, route summary in header
- SessionView: Wire useDays() hook into sidebar via SidebarTabs
- i18n: Add multiDay keys for en + de (day labels, overnight, stats)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- overnight.ts: Yjs helpers to set/clear/check overnight flag on waypoints
- compute-days.ts: Pure function splitting routes into DayStage[] at day breaks
- use-days.ts: Reactive hook mapping Yjs state into computeDays() input
- GPX generate: emit <type>overnight</type> for isDayBreak waypoints
- GPX parse: recognize <type>overnight</type> and set isDayBreak on waypoints
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Both server.ts files called createDb() on every /health request,
creating a new postgres.js connection pool (~10 connections) that was
never closed. Docker healthchecks hit this every 15s, exhausting
max_connections within minutes and causing "too many clients" errors.
Fix: use a fresh postgres.js client (max: 1) per health check that is
properly closed in a finally block. This truly tests whether the DB is
accepting new connections without leaking.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Yjs UndoManager tracks waypoints, no-go areas, and notes. Only
local mutations (origin "local") are undoable — remote changes
from other users are not.
- Keyboard shortcuts: Ctrl/Cmd+Z (undo), Ctrl/Cmd+Shift+Z/Y (redo)
- Shortcuts suppressed in text inputs (browser-native undo there)
- Undo/redo buttons in header with disabled state
- stopCapturing on drag to isolate drag as one undo step
- All mutation sites wrapped with "local" origin
- 5 unit tests for UndoManager behavior
- Archived undo-redo change
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
In dev mode, the sessions API and the Yjs WebSocket server are
separate processes (Vite plugin vs React Router action), so
server-side Yjs doc initialization doesn't reach the client.
Now no-go areas flow the same way as waypoints:
API response → URL params → client-side Yjs initialization.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Save to Journal now includes waypoints and no-go areas alongside
the track — the full planning state needed for round-tripping.
Export Route remains the clean track-only option for other apps.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Save to Journal now includes no-go areas in GPX extensions so they
round-trip correctly: Planner → Journal → Edit in Planner preserves
the no-go polygons.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add description text below each export option explaining the difference
- Fix z-index (z-[1001]) so dropdown renders above the map
- Align dropdown left instead of right to avoid overflow
- Widen dropdown (w-56) to fit descriptions
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The document click handler registered on open could catch the same
click event that opened the dropdown, immediately closing it.
Using mousedown avoids the race since it fires before click.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The chevron was too narrow (px-1.5 → px-2.5) and clicks were
caught by the outside-click handler before toggling the dropdown.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Split button with default "Export GPX" (track only) and dropdown:
- Export Route: clean track for use in any app
- Export Plan: track + waypoints + no-go areas in GPX extensions
(trails:planning namespace) for reimporting into the planner
Also:
- Add no-go area serialization to generateGpx (GPX extensions)
- Parse no-go areas from GPX extensions on import
- Initialize no-go areas in Yjs session from imported GPX
- Save to Journal now exports track only (consistent with Export Route)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The button was rendered as a React component, not a Leaflet control,
so clicks propagated to the map. Use L.DomEvent.disableClickPropagation
on the container — same approach Leaflet's built-in controls use.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
