- Hillshading: mock tile endpoint, enable via DOM evaluate, verify
tile requests fired
- POI markers: mock Overpass API response, zoom to threshold, enable
category, verify marker rendered in marker pane
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When clicking on the route to insert a waypoint, the new point now
snaps to a nearby POI (within 50m) just like click-to-add and drag.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
With multi-waypoint routes (6 BRouter requests per computation) and
debounced re-routing on waypoint changes, 60/hour was too easy to hit
during active planning sessions.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When a waypoint is created from or snapped to a POI, the Yjs Y.Map
now stores osmId (OSM node ID) and poiTags (phone, website, address,
opening hours, etc.). Dragging away clears this data.
This persists through the Yjs document and will be available when the
route is saved to the Journal, enabling future display of campsite
contact details, opening hours, etc. on route detail pages.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When placing or dragging a waypoint within 50m of a visible POI, the
waypoint snaps to the POI's exact coordinates and adopts its name.
Snapping only applies to visible POIs (enabled categories, current
viewport). Explicit name (from "Add as waypoint" button) is preserved
without snapping.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Clicking the button in a POI popup adds the POI's location and name as
a new waypoint at the end of the route. Uses event delegation on the
map container to handle clicks on dynamically created popup buttons.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Try overpass.kumi.systems first, fall back to overpass-api.de
- Reduced max results from 200 to 100, added maxsize:1MB limit
- Shortened timeout from 15s to 10s, added qt (quiet) output mode
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Highlighted waypoints now render above normal waypoints (1000) but
below POI markers (1500) and the elevation highlight dot (2000).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Extract all Leaflet zIndexOffset values into z-index.ts constants:
POI markers (-1000) < cursors (-1000) < ghost waypoint (-100)
< waypoint markers (1000) < highlight dot (2000)
Replaced CircleMarker highlight with a Marker+DivIcon so it
participates in z-index ordering above waypoint markers.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Fixed sort() mutating enabledCategories array in place (used spread copy)
- Show loading status immediately when a fetch will happen, not after
the debounce delay
- Reduced debounce to 800ms and min interval to 2s for snappier response
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Picnic sites (a table in a park) are not useful for route planning
alongside actual camp sites and caravan sites. Removed from the
camping query to reduce noise.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
overpass.kumi.systems has higher rate limits than overpass-api.de.
This is the same endpoint brouter-web uses as its default.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Overpass API sometimes returns HTTP 200 with a plain-text error body
containing "rate_limited" instead of a proper 429 status. Now checks
response body for this pattern before attempting JSON parse.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- PoiRefresher: Use ref for refresh callback to avoid re-running effect
on every category change. Only trigger refresh on category changes,
not on mount.
- usePois: Bump debounce from 500ms to 1000ms, add 3s minimum interval
between actual Overpass requests, increase backoff base to 10s.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- PoiPanel: Collapsible panel with category checkboxes, count badges,
loading/error/zoom-too-low states
- PoiMarkers: L.Marker with L.DivIcon per POI, click popup with name,
hours, website, OSM link. z-index below route/waypoints.
- PoiRefresher: Listens to map moveend, refreshes POIs via usePois hook
- Wired into PlannerMap alongside existing controls
Skipped markercluster (7.3) — can add later if density is an issue.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- brouter-mock.ts: Canned route responses for 2 and 3 waypoint sessions,
plus latLngToPixel helper for pixel-precise map interactions
- planner.test.ts: Route split, map zoom, and overnight tests now use
mockBRouter() for instant deterministic responses instead of real
BRouter — fixes all 3 flaky tests
- Used .first() for sidebar km locator to avoid strict mode violations
when both header summary and stats footer match
All 38 E2E tests pass in 9.7s (was 34s+ with real BRouter).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The test used waypoints 300km apart causing BRouter timeouts. Switched
to nearby Berlin waypoints for fast route computation. Scoped all
locators to the sidebar to avoid strict mode violations from map
elements matching the same text.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- "km" locator matched both header summary and stats footer — narrowed
to match "km ·" pattern unique to the header
- "Day 1" locator matched both map label pill and sidebar header —
scoped to sidebar with page.locator("aside")
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Synced delta spec (6 requirements) to openspec/specs/multi-day-routes/.
Archived change to openspec/changes/archive/2026-04-11-multi-day-routes/.
All 4 artifacts complete. All 35 tasks complete.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When hovering a day row in the route detail breakdown, the map smoothly
flies to fit that segment's bounds (0.5s animation). On mouse leave it
flies back to the full route bounds. Refactored geometry splitting into
shared helpers used by both DayColoredRoute and FlyToSegment.
Rotation not implemented — Leaflet doesn't support native bearing
rotation. Would require leaflet-rotate plugin or MapLibre GL.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Hovering a day row dims other segments (opacity 0.3) and thickens
the hovered day's segment (weight 5) for clear visual focus
- Each day row has a GPX download button that exports just that day's
track segment via /api/routes/:id/gpx?day=N
- GPX endpoint uses computeDays to extract the correct track slice
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The subtle size bump (24→28px) is sufficient visual feedback without
the outline ring.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace position-based CircleMarker highlight with index-based marker
highlighting. Hovered waypoint marker grows from 24px to 30px with an
outline ring in its color. Uses CSS transition for smooth animation.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Hovering a waypoint row in the sidebar highlights it on the map with
the same red CircleMarker used by the elevation chart hover. Reuses
the existing highlightPosition state — both sidebar and chart feed
into the same mechanism.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Use absolute positioning with left:50% + translate(-50%) for proper
horizontal centering of auto-width content. Reduced font to 10px,
padding to 1px 6px, border-radius to 8px.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Use iconSize + iconAnchor instead of CSS transform to position the
day label pill above the waypoint marker. The label was overlapping
the marker because translate(-50%, -30px) didn't clear the 24px icon.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
ExportButton.getWaypoints() wasn't reading the overnight flag from
Yjs Y.Maps, so exported plan GPX was missing <type>overnight</type>.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Three gaps in the Planner → Journal → Planner roundtrip:
1. SaveToJournalButton: wasn't including isDayBreak when building
waypoints for GPX generation
2. PlannerMap GPX import: wasn't setting overnight on Y.Maps when
importing waypoints with isDayBreak
3. use-yjs initial waypoints: wasn't setting overnight from isDayBreak
Also widened the waypoint type throughout the chain (api.sessions,
session.$id, SessionView, extractWaypoints) to carry isDayBreak.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- planner.test.ts: E2E test for overnight toggle → day breakdown in sidebar,
and GPX import with overnight metadata
- integration.test.ts: E2E test for isDayBreak preservation through GPX import
- RouteMapThumbnail: Per-day route coloring with alternating colors
- overnight.test.ts: Y.Doc-aware tests for isOvernight/setOvernight
- daybreaks-extraction.test.ts: GPX → dayBreaks index extraction tests
All 28 tasks complete.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- RouteMapThumbnail: Color route segments per day with alternating colors
when dayBreaks are present, pass through from route detail page
- overnight.test.ts: 6 tests for isOvernight/setOvernight with Y.Doc
- daybreaks-extraction.test.ts: 3 tests for GPX → dayBreaks index extraction
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- compute-days.test.ts: 8 tests covering single day, two days, three days,
ascent/descent, edge cases (first/last overnight, single waypoint, empty)
- generate.test.ts: 4 new tests for isDayBreak emission, GPX roundtrip with
isDayBreak preserved, and splitByDay multi-track output
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
generateGpx() gains a splitByDay option that splits the track into
separate <trk> elements per day, each named "Day N: Start - End".
Track points are split at the closest points to overnight waypoints.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Overnight waypoints render amber-brown (#8B6D3A) with moon icon
- Day boundary labels (white pill "Day N · X km") at overnight waypoints
- Right-click middle waypoints toggles overnight (first/last still delete)
- Wire days prop through SessionView → PlannerMap
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
WaypointSidebar and DayBreakdown were calling useTranslation() without
the "planner" namespace, then using fully qualified keys like
"planner.multiDay.overnight". Fixed to use useTranslation("planner")
and drop the prefix from all t() calls.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
